Using Other Functions

SECOND ZONE (Speaker System B) Setup

Stereo playback in another room

This setup enables you to listen to a pair of stereo speakers independently of the main speaker system (A speakers) hooked up to the receiver. The VSX-45TX has two possibilities for playback in another room. You can choose SECOND ZONE, and use the speakers hooked up to the surround back terminals as a B speaker system, that is, playing the same source as the main speaker system but from independent stereo speakers. Or, you can choose MR&S and use the speakers hooked up to the surround back terminals for MULTI-ROOM playback (see pages 74–79 for more on MULTI-ROOM).

1Connect a pair of speakers to the surround back speaker terminals.

2Select SECOND ZONE or MR&S (MULTI-ROOM) in the SURRBACK SYSTEM setup (see page 37).

memo Please use speakers with a nominal impedance rated 8 -16 .

A/B Speaker Button

If you selected NORMAL SYSTEM in the SURRBACK SYSTEM setup (see page 37) your surround back speakers will be used as part of your A speakers (main speaker system) and this button will simply switch it off or on. If you selected MR&S in the SURRBACK SYSTEM setup (see page 37) the surround back speakers will be used for the MULTI-ROOM and this button will simply switch A speakers (main speaker system) on or off. If you selected SECOND ZONE in the SURRBACK SYSTEM setup (see page 37) this button will cycle through the A (main) speaker system, the B speaker system (the surround back speakers acting as a separate second zone), both speaker systems, and off.

MULTI JOG

CONTROL

SIGNAL

HI-BIT

SB CH

BAND

CLASS

STATION TUNING

 

TUNER

MULTI ROOM &

SOURCE

SET UP

RETURN

SELECT

HI-SAMPLING

MODE

SELECT

 

EDIT

CONTROL

ON/OFF

PHONES

 

 

TONE CONTROL

 

SETUP

 

 

MULTI JOG/ENTER

 

 

 

SPEAKERS

TONE

BASS/TREBLE

 

 

MIC

 

 

 

 

 

 

 

 

 

 

 

 

 

DIGITAL IN

S-VIDEO

VIDEO

L

AUDIO

R

 

 

 

 

 

 

 

 

VIDEO INPUT

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

1Press the Speakers button (on the front panel) to switch speakers on/ off or cycle through the different speaker systems if SECOND ZONE has been selected in the SURRBACK SYSTEM setup (see page 37) .

A(SP3A):

Sound is output from speaker system A and the same signal is output from the pre out

 

terminals.

B(SP3B):

Sound is output from the two speakers in speaker system B (the surround back speakers).

 

Multichannel sources won't be heard from these speakers.

A&B(SP3AB): Sound is output from speaker system A and the B speakers. Multichannel sources will be downmixed to two channels.

OFF(SP3 ): No sound is output from the speakers. Depending on the input signal and settings in SPEAKER SYSTEMS sound may be output from the subwoofer. The same sound is output from the pre out terminals as when selecting speaker system A (above).

memo

• What is output from the subwoofer depends on the SPEAKER SETTING settings and the type of

source.

 

Depending on the settings in SPEAKER SETTING and the MULTI CH IN SELECT, output from the SURROUND BACK pre out terminals may change.

When using headphones the speakers are switched off.

Please use speakers with a nominal impedance rated 8 -16 .

70

Page 70
Image 70
Pioneer VSX-45TX manual Second Zone Speaker System B Setup, Stereo playback in another room, Speaker Button, Source