Pioneer VSX-820 height speakers, Connect the surround back or front

Connecting your equipment 03

Bare wire connections

A-Speaker terminals:

1Twist exposed wire strands together.

2Loosen terminal and insert exposed wire.

3Tighten terminal.

1 2 3

10 mm (3/8 in.)

B-Speaker terminals:

1Twist exposed wire strands together.

2Push open the tabs and insert exposed wire.

3Release the tabs.

1 2 3

10 mm (3/8 in.)

CAUTION

•These speaker terminals carry HAZARDOUS LIVE voltage. To prevent the risk of electric shock when connecting or disconnecting the speaker cables, disconnect the power cord before touching any uninsulated parts.

•Make sure that all the bare speaker wire is twisted together and inserted fully into the speaker terminal. If any of the bare speaker wire touches the back panel it may cause the power to cut off as a safety measure.

Connect the surround back or front
height speakers					English
Connect the PRE OUT outputs of the unit and
additional amplifier to add a surround back or
front height speaker.
• If the surround back speaker or the front
height speaker is connected, set the Pre					Deutsch
Out setting (see The Pre Out Setting on
page 47).
Surround back or
front height speakers			Surround back or
SBL/FHL SBR/FHR
			front height		Français
				ANALOG
			channel amplifier
				INPUT
			L	R
IN BD		SUBWOOFER			Italiano
		PRE OUT
			CD-R/TAPE DVR/VCR
		SURR BACK /		ADAPTER	Nederlands
DVD		FRONT		(OUTPUT 5 V
		HEIGHT
		L
		(Single)	OUT
		R
TV/SAT		PRE OUT
		CD	CD-R/TAPE DVR/VCR
		L
COAXIAL	ASSIGNABLE	IN	IN	ANTENNA
DVR/VCR IN 1		R
(CD)
OPTICAL		TV/SAT	DVD BD	FM
				UNBAL
IN 2		L		75	Español
				SIRIUS
OUT		IN	IN	IN
IN 1		R		AM
(CD-R/TAPE)
	ASSIGNABLE			LOOP
HDMI	1 2		AUDIO

•You can use the additional amplifier on the surround back channel pre-outs for a single speaker as well. In this case plug the amplifier into the left (L (Single)) terminal only.

19

En