Controlling the rest of your system
Chapter 9:Controlling the rest of your system
09
English
Most components can be assigned to one of the MULTI CONTROL buttons using the component’s manufacturer preset code stored in the remote.
However, please note that there are cases where only certain functions may be controllable after assigning the proper preset code, or the codes for the manufacturer in the remote control will not work for the model that you are using.1
Note
•You can cancel or exit any of the steps by pressing RECEIVER .
•After one minute of inactivity, the remote automatically exits the operation.
RECEIVER | INPUT SELECT |
|
|
|
| MEMORY | |
|
|
| INPUT |
|
|
| |
|
|
|
|
|
|
| |
BD | DVD | TV |
| HDD | DVD | VCR |
|
| 1 | 2 | 3 | DISP | |||
|
|
|
| ||||
|
|
|
| S.RETRIEVER | SB CH | CH SELECT | EQ |
DVR | CD | CH | 4 | 5 | 6 | CH | |
|
|
|
|
| |||
|
|
|
| MIDNIGHT SPEAKERS | LEV | PHASE | |
|
|
|
| 7 | 8 | 9 | CH |
ADAPTER | iPod USB | VIDEO |
| DIMMER |
| LEV | SHIFT |
| 0 |
| |||||
|
|
|
| CLR | ENTER |
| |
|
|
|
| / +10 |
|
|
|
1While pressing the RECEIVER button, press and hold the ‘1’ button for three seconds.
2Press the MULTI CONTROL button for the component you want to control.
The component can be assigned to the BD, DVD, TV, DVR, CD,
•When assigning preset codes to TV CONTROL, press INPUT here.
3Use the number buttons to enter the preset code.
You can find the preset codes on page 55.
If the correct code has been input the power of the component being input will turn on or off.
The power of the component being input will only turn on or off if that component is able to be turned on directly by remote control.
4Repeat steps 2 through 3 to try a different code, or to enter a code for another component you want to control.
5When you’re done, press RECEIVER .
Español Nederlands Italiano Français Deutsch
Note
1 TV CONTROL buttons are only dedicated to control the TV (for example, codes for TV, CATV, Satellite TV or DTV).
51
En