Listening to your system

Choosing the input signal

On this receiver, it is possible to switch the input signals for the different inputs as described below.1

•Press SIGNAL SEL to select the input signal corresponding to the source component.

When DIGITAL (C1/O1/O2) or HDMI (H) is selected and the selected audio input is not provided, A (analog) is automatically selected.

Each press cycles through the following:

•A – Selects the analog inputs.

•DIGITAL – Selects the digital input. The coaxial 1 input is selected for C1, and the optical 1 or 2 audio input is selected for O1 or O2.

•HDMI – Selects an HDMI signal. H can be selected for BD, DVD, TV/SAT or DVR/VCR

input. For other inputs, HDMI cannot be selected.2

When set to DIGITAL or HDMI, 2lights when a Dolby Digital signal is input, and DTS lights when a DTS signal is input.

When the HDMI is selected, the A and DIGITAL indicators are off (see page 12).

Using the headphone

•Insert the headphone into the PHONES jack.

The sound is heard from the headphone and no sound is heard from the speakers connected to this receiver. The listening mode when the sound is heard from the headphone can be selected only from STEREO or ALC.

05

Español Nederlands Italiano Français Deutsch English

Note

1• When digital input (optical or coaxial) is selected, this receiver can only play back Dolby Digital, PCM (32 kHz to 96 kHz) and DTS (including DTS 96 kHz / 24 bit) digital signal formats. The compatible signals via the HDMI terminals are: Dolby Digital, DTS, SACD (DSD 2 ch), PCM (32 kHz to 192 kHz sampling frequencies), Dolby TrueHD, Dolby Digital Plus, DTS-EXPRESS, DTS- HD Master Audio and DVD Audio (including 192 kHz). With other digital signal formats, set to A (analog) (TUNER).

•You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make the proper digital connections (page 23) and set the signal input to C1/O1/O2 (DIGITAL).

•Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.

2When the HDMI option in Setting the Audio options on page 38 is set to THRU, the sound will be heard through your TV, not from this receiver.

41

En