Additional information

11

HDMI

Symptom

Remedy

No picture or sound.

• If the problem still persists when connecting your HDMI component

 

directly to your monitor, please consult the component or monitor

 

manual or contact the manufacturer for support.

 

 

No picture.

• Video signals that are input from the analog video terminal will not

 

output from the HDMI terminal. Signals that are input from the HDMI

 

terminal will not output from the analog video terminal. Be consistent

 

with the type of cable between input and output.

 

• Depending in the output settings of the source component, it may be

 

outputting a video format that can’t be displayed. Change the output

 

settings of the source, or connect using the component or composite

 

jacks.

 

• This receiver is HDCP-compatible. Check that the components you are

 

connecting are also HDCP-compatible. If they are not, please connect

 

them using the component or composite video jacks.

 

• Depending on the connected source component, it’s possible that it

 

will not work with this receiver (even if it is HDCP-compatible). In this

 

case, connect using the component or composite video jacks between

 

source and receiver.

 

• If video images do not appear on your TV or flat panel TV, try adjusting

 

the resolution, Deep Color or other setting for your component.

 

• To output signals in Deep Color, use an HDMI cable (High Speed

 

HDMI® Cable) to connect this receiver to a component or TV with the

 

Deep Color feature.

 

 

OSD does not appear.

• The OSD will not appear if you have connected using the HDMI output

 

to your TV. Use component or composite connections when setting up

 

the system.

 

 

No sound, or sound

• If you’ve made separate connections for audio, make sure you have

suddenly ceases.

assigned the analog/digital jack(s) to the corresponding HDMI input for

 

the component.

 

• Check the audio output settings of the source component.

 

• Check that the Audio Parameter setting is set to HDMI AMP/THRU

 

(refer to page 39).

 

• If the component is a DVI device, use a separate connection for the

 

audio.

 

• HDMI format digital audio transmissions require a longer time to be

 

recognized. Due to this, interruption in the audio may occur when

 

switching between audio formats or beginning playback.

 

• Turning on/off the device connected to this unit’s HDMI OUT terminal

 

during playback, or disconnecting/connecting the HDMI cable during

 

playback, may cause noise or interrupted audio.

 

 

Español Nederlands Italiano Français Deutsch English

71

En