USB interface VSX-LX60 only, IPod messages | Pioneer specs

14Additional information

USB interface (VSX-LX60 only)

SymptomRemedy

USB mass storage device is not recognized by the receiver.

•Try switching the receiver off, then on again.

•Make sure you have completely inserted the USB connector to this receiver.

•Check that the memory format is FAT16 or FAT32 (FAT12, NTFS and HFS are not supported).

•USB devices with an internal USB hub are not supported.

USB ERR3 shows in the display	• If this message continues to appear after going through all the checks in Important on page 35 of USB
when connecting a USB device.	playback, take the unit to your nearest Pioneer authorized service center or your dealer for servicing.

Can’t play audio files.	• The WMA or MPEG-4 AAC files were recorded using DRM (digital rights management), or the bit rate/
	sampling rate is not compatible (see Compressed audio compatibility on page 35). This is not a
	malfunction.

iPod messages

Symptom	Cause	Action
Error I1	There is a problem with the signal path from the	Switch off the receiver and reconnect the iPod to the receiver.
	iPod to the receiver.	If this doesn’t seem to work, try resetting your iPod.

Error I2	The software version being used with the iPod	Update the software being used with the iPod (please use the
	needs to be updated.	latest iPod software versions later than the iPod updater 2004-
		10-20).

No Music Track	There are no playable songs currently stored in	Input some music files compatible with iPod playback.
	the iPod.

Loading Error	There is no responce from the iPod.	Update the software being used with the iPod (please use the
		latest iPod software versions later than the iPod updater 2004-
		10-20).

Note

•If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions.

88

En

Image 88

Pioneer operating instructions USB interface VSX-LX60 only, IPod messages, SymptomRemedy, Symptom Cause Action

Contents

Operating Instructions Important the Moulded Plug Risk of Electric Shock Do not Open Operating Environment Contents Other Settings Using other functionsOther connections Hdmi Control Installing the receiver Before you startBefore you start Chapter Checking what’s in the box Minute guide Minute guide ChapterIntroduction to home theater Listening to Surround Sound Speaker configuration in the OSD Switch on the receiver and your TVProgress report is displayed on-screen while Receiver outputs test tones to determine the speakers Minute guide Problems when using the Auto Mcacc SetupPlaying a source Using Phase Control Press Phase Phase Control to select Phase ControlPhase Control indicator on the front panel lights 02 5 minute guide Using Full Band Phase Control Press Phase Phase Control to selectFullband PHASE.3 Tweeter Midrange Woofer Connecting your equipment Chapter Connecting your equipmentRear panel Connecting your equipment When making cable connectionsAudio/video source inputs/outputs Multichannel analog audio inputs Connecting your equipment Connecting your TV and DVD player Connect using a standard video cable or an S-video cable Connecting a satellite/cable receiver or other set-top box VSX-LX70 Connecting a DVD/HDD recorder, VCR For a second recorder, use the DVR/VCR2 in inputs Use a three-way component video cable Connecting digital audio sourcesUse an optical cable for the connection Connecting your equipment Connecting analog audio sources TV game, video camera, etc Connecting the speakers Connecting your equipment Installing your speaker systemCenter Bare wire connections Placing the speakers Connecting antennas THX speaker system setupAM loop antenna Assemble the stand as shown in the illustration.1 FM wire antenna Connecting external antennasPlugging in the receiver AC outlet Controls and displays Controls and displays ChapterFront panel Input Selector dial Use to select an input source Operating range of remote control unit Controls and displays Controls and displays Display Remote control RECEIVERInput Select Select Status Multi OPEShift SOURCE Listening to your system Listening to your system ChapterAuto playback Listening in surround sound Using the Home THX modes Using the Advanced surround effectsTHX Games Mode Listening to your system Using Front Stage Surround Advance Using Stream DirectListening in stereo Tip Listening to your system Selecting Mcacc presets Choosing the input signalUsing surround back channel processing Hdmi Digital Analog Using the Virtual Surround Back mode BD Tvctrl Using the USB interface USB playbackUSB playback Chapter Basic playback controls USB playback Compressed audio compatibility Using the tuner Using the tuner ChapterSaving station presets Listening to the radio Using the tuner Naming station presetsListening to station presets An introduction to RDS Using EON Searching for RDS programsDisplaying RDS information Search shows in the display System Setup menu System Setup menu ChapterMaking receiver settings from the System Setup menu Select the setting you want to adjust Point System Setup menuFront Align If necessary, confirm the speaker configuration in the OSD.1 Surround back speaker setting Manual Mcacc setupSelect ‘Surr Back System’ from the System Setup menu Select the surround back speaker setting Select ‘Manual MCACC’ from the System Setup menu Select ‘Fine Ch Level’ from the Manual Mcacc setup menuAdjust the level of the left channel When you’re finished, press Return Select ‘Fine SP Distance’ from the Manual Mcacc setup menu Select ‘Standing Wave’ from the Manual Mcacc setup menuFine Speaker Distance Standing Wave Acoustic Calibration EQ Adjust How to use Acoustic Calibration EQ ProfessionalHow to interpret the graphical output Acoustic Calibration EQ Professional Select ‘EQ Professional’ then press Enter Using Acoustic Calibration EQ ProfessionalSelect an option and press Enter Full Band Phase Control Checking Mcacc preset data Select ‘FULL Band Phase CTRL’ from the System Setup menuSelect ‘Data Management’ from the System Setup menu Data Management Renaming Mcacc presets Copying Mcacc preset dataClearing Mcacc presets System Setup menu Manual speaker setup Speaker SettingSelect ‘Manual SP Setup’ then press Enter Select ‘Speaker Setting’ from the Manual SP Setup menu Channel Level Speaker Distance THX Audio Setting Curve Connecting an iPod Connecting your iPod to the receiverOther connections Other connections Chapter Connecting using Hdmi Watching photos and video contentOther connections Basic playback controls About Hdmi Switching the speaker system Selecting the multichannel analog inputsUse the Input Select button to select Multi CH Select ‘Speaker B’ from the ‘Surr Back System’ menu Bi-amping your front speakers Bi-wiring your speakersConnect your speakers as shown below Making MULTI-ZONE connections Large Basic MULTI-ZONE setup Zone Secondary MULTI-ZONE setup ZoneMULTI-ZONE listening options Sub Zone Input sources available Connecting an IR receiver Using the MULTI-ZONE controlsMULTI-ZONE remote controls RCV/Z3 ZONE3 Switching components on and off using the 12 volt trigger Using this receiver with a Pioneer plasma displayCloset or shelving unit Non-Pioneer IRcomponent Using the SR+ mode with a Pioneer plasma display Pioneer plasmaDisplay Satellite receiver, etc Other connections Connecting a PC for Advanced Mcacc output Advanced Mcacc output using your PCSelect ‘Output PC’ and press Enter Personal computer Hdmi Control Chapter Hdmi ControlMaking the Hdmi Control connections Hdmi Control Setting the Hdmi options Synchronized amp modeBefore using synchronization About Hdmi Control Other Settings Chapter Other SettingsInput Setup menu Input Input Terminals Source Digital Other Setup menuVideo Other Settings Multi Channel Input SetupZone Audio Setup SR+ Setup for Pioneer plasma displays OSD Adjustment Select the ‘PDP Volume Control’ setting you wantSelect ‘OSD Adjustment’ from the Other Setup menu You will return to the Other Setup menu Using other functions Using other functions ChapterSetting the Audio options Setting What it does Options Using other functions Setting the Video options Playing a different source when recording Making an audio or a video recordingSelect the source you want to record Prepare the source you want to record Reducing the level of an analog signal Switching the speaker impedanceUsing the sleep timer Dimming the display Checking your system settings Resetting the systemDefault system settings Setting Default Neo6 Options Center Image All Inputs Listening Mode 2 ch Listening Mode x chListening Mode HP Channel level M1-M6 Speaker Distance M1-M6 Setting the remote to control other components Selecting preset codes directlyRemote controls Controlling the rest of your system Erasing one of the remote control button settings Resetting the remote control presetsConfirming preset codes Controlling the rest of your system Renaming input source names Multi Operation and System OffDirect function Programming a multi-operation or a shutdown sequence Using System off Using multi operationsControls for TVs Buttons Function Components Controls for other componentsFunction Components Button s Function Components Operating other Pioneer components with this unit’s sensorDecide which component you want to use the remote sensor Troubleshooting PowerSymptom Remedy Additional information Additional information No sound Other audio problems Phase Control feature Settings Video Professional Calibration EQ graphical output DisplayGraphical output following Calibration does not appear Remote control Hdcp Error shows in the display SymptomRemedy Symptom Cause ActionUSB interface VSX-LX60 only IPod messages Additional information Surround sound formats Dolby About THX Windows Media Audio 9 Professional About Neural Surround Input signal format Standard Stereo 2 channel signal formatsAuto Surround Multichannel signal formats DTS-ES b DTS-ES Matrix/Discrete DTS-ES+THX Matrix/Discrete Movie a MOVIE+THX aWMA9 Pro Channel Decoding Surround Back speakers Input signal format Sacd Direct VSX-LX70 or Straight decoding VSX-LX60 Additional information Specifications Features Additional information Cleaning the unitOur philosophy DCDi IPod Ready Pioneer Corporation