Planar C3013T, C3012T user manual Advanced Menu

Advanced Menu

The Advanced menu contains settings for integrated peripherals, memory shadow, cache, and large disk access mode.

hh				h	h			h
			h	h		h	h		h
h	h
	hhh			h
	h							hh
Figure 19 — Advanced menu.
Integrated Peripherals Subh-Menu
The Integrated Peripherals sub-menu allows configuration of the onboard I/O ports, touch
screen, andh		IDE controller.					h

Advanced Chipset Control Sub-Menu

This option selects the Advanced Chipset Control sub-menu in order to configure the chipset.

Plug & Play O/S

If enabled, this option informs the System BIOS that the operating system that will be booted supports plug-and-play. This forces the plug-and-play portion of the System BIOS to only con- figure motherboard devices and those peripherals that are necessary for booting (display, hard disk, etc.), the rest being left to the operating system to configure. The default is No.

Reset Configuration Data

If enabled, this option clears the Extended System Configuration Data (ESCD) block residing in FBD main block #2. This is necessary the first time a system is turned on or if the ESCD becomes corrupted. The default is No. This option is automatically reset to No after the ESCD is cleared.

Large Disk Access Mode

If you are using a hard disk larger than 528 MB and are running MS-DOS® , then set this selec- tion to DOS. If you are using a different operating system, then set it to Other. When set to DOS, the System BIOS will perform cylinder/head translation, if the drive is configured in Setup to have more than 1024 cylinders. This allows MS-DOS systems to use hard disks up to 8 GB (1024C x 255H x 63S) in size without special drivers or LBA. The default is DOS.

Chapter Five: BIOS Setup 21