Planar C3012T Power Supply, Power Cord Selection, Headphones or External Speakers, Power On

If this device is used in a medical facility, any operating systems or programs used are required to be in the user’s language.

Power Supply

If you will be using AC power, you will need to use the AC power supply adapter that was packed with your Clean Screen. If you will be using a Planar mounting stand with batteries, you will use its power connector.

Power Cord Selection

The Clean Screen AC power supply adapter has been provided with a “Hospital Only” or “Hospital Grade” type cord and plug. The plug has NEMA 5-15 approval. In the event it becomes necessary to replace the power cord, it is important to select a “Hospital Only” or “Hospital Grade” type cord and plug.

Headphones or External Speakers

Please note that when you use headphones or external speakers, the internal speakers are auto- matically disconnected. You may use headphones or speakers with an impedance of 32–300Ω .

Powering Up the Clean Screen PC

Flat Panel color LCD TFT display ranging from 12.1 inch to 13.8 inches

Push-Button	Push-Button
Brightness	Volume
Control	Control
	Hard Disk
	Activity Light
	Power On
	Light
Multimedia	Multimedia

Figure 16 – Operating unit with keyboard.

Power On

Once the keyboard, mouse, power, and all peripherals have been connected, use the power switch located beneath the power-on indicator to power up the unit.

Always power down the unit before you connect or disconnect any peripheral.

14Planar Clean Screen PC User’s Manual