QUICK LINKS
Contents
FCC Compliance Statement
Index
Ordering Parts
Product Information
Troubleshooting
Problem | Solution |
|
|
Display indicates “Over Range”
Regulatory Compliance
Warranty
GETTING STARTED
About the Display
Unpack Display
Identify Components
Adjust Orientation/Angle
INSTALLING THE DISPLAY
Connect Power
The frequency range is out of display specifications, or the incoming resolution is higher than 1280 x 1024. The video data turns off and this warning message appears.
In analog mode, check that the scanning frequency is in
a horizontal range of 24 to 80 kHz and a vertical range from 50 to 75 Hz. Or, check that the display resolution is set to 1280 x 1024 or lower.
In digital mode, check that the scanning frequency is in
a horizontal range of 30 to 80 kHz and a vertical range from 50 to 75 Hz. Or check that the display resolution is set to 1280 x 1024 or lower.
Connect Video
Connect Audio
Connect Touch Screen
Power Management System
USING THE CONTROLS
Overview
Hot Key Functions
OSD Menu
Function Menus
OSD Lockout
APPENDIXES
Technical Information
Supported Timing
Troubleshooting
Display indicates “No Video”
There is no | Check that the video cable is connected securely to the computer |
The onscreen display shows this message. | and the display. |
VS17 Display | 24 |
