4.2.1Cable Modem

With Cable Modem connection, the ISP will automatically give you an IP address. Some ISP may also require you to fill in additional information such as Host Name and MAC address (see screen below).

Note: The Host Name and MAC address section is optional and you can skip this section if your ISP does not require these settings for you to connect to the Internet.

 

 

 

 

Parameters

 

Description

 

 

 

 

 

Host Name

Type in the host name provided by your ISP if any; otherwise, just leave it blank.

 

 

 

 

 

To connect to Internet, your ISP will require a MAC address from your PC. Type in this

MAC Address

MAC address in this section or use the “Clone MAC Address” button to replace the

WAN port MAC address with the your PC’s. To find out the PC’s MAC address, see

 

 

 

 

Appendix A. (also see Glossary for an explanation on MAC address).

 

 

 

 

When the configuration finished, click “OK” to next step or click “Back” to previous step. After press “OK”, you will see a web screen to prompt you the configurations save successfully. You may press “Apply” to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more information about this screen.

- 14 -