Reset

Click “Reset” will clear your current selections.

 

 

After configuration complete, please click “Apply” button to save the configuration. Then you will see a screen to prompt you the settings are saving successfully. You may press “Continue” for configure other settings or “Apply” to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more information about this screen.

5.6.2Port Forwarding

The Port Forwarding allows you to re-direct a particular range of service port numbers (from the Internet/WAN Ports) to a particular LAN IP address. It helps you to host some servers behind the firewall.

Parameters

Description

Enable Port Forwarding

Enable Port Forwarding.

 

 

 

This is the private IP of the server in LAN.

Private IP

Note: You need to give your LAN PC clients a fixed/static IP address for Port

 

Forwarding to work properly.

 

 

 

This is the protocol type to be forwarded. You can choose to forward “TCP”

Type

or “UDP” packets only or select “both” to forward both “TCP” and “UDP”

 

packets.

 

 

Port Range

The range of ports to be forward to the private IP.

 

 

Comment

The description of this setting.

 

 

 

Fill in the "Private IP", “Type”, “Port Range” and "Comment" of the setting to

Add

be added and then click "Add". Then this Port Forwarding setting will be

 

added into the "Current Port Forwarding Table" below. If you find any typo

 

 

 

- 51 -