You can designate a particular IP address range for your DHCP server to issue IP

Start IP/End IP

addresses to your LAN Clients. By default the IP range is from: Start IP

 

192.168.0.100 to End IP 192.168.0.200.

 

 

Domain Name

You can specify the Domain Name for your Access Point.

 

 

 

 

 

This function allows you to assign a static IP address to a specific computer

Static DHCP Leases

forever, so you don’t have to set the IP address for a computer, and still enjoy the

Table

benefit of using DHCP server. Maximum 16 static IP addresses can be assigned

 

here.

 

 

Enable Static DHCP

Check this box to enable this function, otherwise uncheck it to disable this

Leases

function.

 

 

MAC Address

Input the MAC address of the computer or network device (total 12 characters,

with character from 0 to 9, and from a to f, like ‘001122aabbcc’)

 

 

 

IP address

Input the IP address you want to assign to this computer or network device.

 

 

Add

After you inputted MAC address and IP address pair, click this button to add the

pair to static DHCP leases table.

 

 

 

Clear

If you want to remove all characters you just entered, please click it.

 

 

Note:

After you clicked ‘Add’, the MAC address and IP address mapping will be added to ‘Static DHCP Leases Table’ section as below shoeing.

If you want to delete a specific item, please check the “Select” box of a MAC address and IP address mapping, then click ”Delete Selected” button; if you want to delete all mappings, click “Delete All” button. If you want to deselect all mappings, click “Reset” button.

After configuration complete, please click “Apply” button to save the configuration. Then you will see a screen to prompt you the settings are saving successfully. You may press “Continue” for configure other settings or “Apply” to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more information about this screen.

- 34 -