Parameters | Description | |
| Check “Enable MAC Filtering” to enable MAC Filtering. | |
| If select “Deny”, all PCs will be allowed to access Internet accept for the PCs | |
Enable MAC Filtering | in the list below. | |
| If select “Allow”, all PCs will be denied to access Internet accept for the PCs | |
| in the list below. | |
|
| |
| Fill in “Client PC MAC Address” and “Comment” of the PC that is allowed to | |
Add PC | access the Internet, and then click “Add”. If you find any typo before adding it | |
| and want to retype again, just click "Reset" and the fields will be cleared. | |
|
| |
| If you want to remove some PC from the "MAC Filtering Table", select the | |
Remove PC | PC you want to remove in the table and then click "Delete Selected". If you | |
want remove all PCs from the table, just click "Delete All" button. If you want | ||
| ||
| to clear the selection and | |
|
| |
| Check “Enable IP Filtering Table” to enable IP filter. | |
| If select “Deny”, all PCs will be allowed to access Internet accept for the PCs | |
Enable IP Filtering Table | in the list below. | |
| If select “Allow”, all PCs will be denied to access Internet accept for the PCs | |
| in the list below. | |
|
| |
Add PC | You can click “Add PC” to add an access control rule for users by IP | |
addresses. Please refer to section 5.7.1.1. | ||
| ||
|
| |
| If you want to remove some PCs from the "IP Filtering Table", select | |
Remove PC | the PC you want to remove in the table and then click "Delete | |
| Selected". | |
|
| |
| - 59 - |