5.3LAN
The LAN Port screen below allows you to specify a private IP address for your router’s LAN interface.
Parameters | Description | |
LAN IP | Please input the IP address of this router. | |
|
| |
IP Address | Designate the Access Point’s IP Address. This IP Address should be unique in | |
your network. The default IP Address is 192.168.0.1. | ||
| ||
|
| |
Subnet Mask | Specify a Subnet Mask for your LAN segment. The Subnet Mask of the Access | |
Point is fixed and the value is 255.255.255.0. | ||
| ||
|
| |
802.1d Spanning Tree | If it is enabled, this router will use the spanning tree protocol to prevent from | |
network loop happened in the LAN ports. | ||
| ||
|
| |
DHCP Server | Enable or disable the DHCP Server. | |
|
| |
|
| |
DHCP Server | These settings are only available when ‘DHCP Server’ in ‘LAN IP’ section is | |
‘Enabled’ | ||
| ||
|
| |
| The DHCP Server will temporarily assign IP addresses to LAN clients. In the | |
Lease Time | Lease Time setting you can specify the time period that the DHCP Server lends | |
an IP address to your LAN client. The DHCP Server will change your LAN client’s | ||
| ||
| IP address when this time threshold period is reached. | |
|
| |
| - 33 - |