5.4.4Access Control

WNRT-620 provides MAC Address Filtering, which prevents the unauthorized users from accessing your

wireless network.

Parameters

Description

Enable Wireless

Enable or disable the MAC Address Filtering function.

Access Control

 

 

 

Add MAC Address

In the bottom “New” area, fill in the “MAC Address” and “Comment” of the wireless

to the control table

station and then click “Add”. Then this wireless station will be added into the “MAC

 

Address Filtering Table” above.

 

 

Remove MAC

If you want to remove some MAC address from the “Current Access Control List”,

address from the

select the MAC addresses you want to remove in the list and then click “Delete

table

Selected”.

 

 

Delete All

If you want remove all MAC addresses from the list, just click this button.

 

 

Reset

Click “Reset” will clear your current selections.

 

 

After configuration complete, please click “Apply” button to save the configuration. Then you will see a screen to prompt you the settings are saving successfully. You may press “Continue” for configure other settings or “Apply” to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more information about this screen.

- 43 -