6.4AP Bridge Point to Multi-point Mode

This function allows WNRT-620 to bridge more than 2 wired Ethernet networks together by

wireless connection.

Parameter

Description

Mode

Shows the current operation mode. You may set WNRT-620 to other operating

 

 

mode by select other operating mode.

 

2.4GHz (B): It forces the WNRT-620 to operate in 802.11b only.

 

2.4GHz (G): It forces the WNRT-620 to operate in 802.11g only.

 

2.4GHz (N): It forces the WNRT-620 to operate in 802.11n only.

Band

2.4GHz (B+G): It allows the WNRT-620 to operate in 802.11b and 802.11g

 

simultaneously.

 

2.4GHz (B+G+N): It allows the WNRT-620 to operate in 802.11b, 802.11g, and

 

802.11n simultaneously.

 

Select the appropriate channel from the list provided to correspond with your

Channel Number

network settings. Channels differ from country to country.

 

Channel 1-11 (North America)

 

 

MAC Address 1-4

If you want to bridge multiple WNRT-620 in this mode, you have to enter the MAC

addresses of other WNRT-620 into the fields.

 

 

 

 

IF you want to enable security to protect your wireless connection. Please press

Set Security

“Set Security” button and refer to section 6.7 “Security setting for bridge mode” to

 

configure the detail settings.

 

 

After configuration complete, please click “Apply” button to save the configuration. Then you will see a screen to prompt you the settings are saving successfully. You may press “Continue” for configure other

- 72 -