You may press “Refresh” to get the new Access Point and select one of

 

them to click “Done” to connect.

WLAN MAC

Keep default setting: WRT-620 will use it’s own MAC address to access

 

the wireless LAN.

Press “MAC Clone” button: It will use PC’s MAC address to access the

wireless LAN.

After configuration complete, please click “Apply” button to save the configuration. Then you will see a screen to prompt you the settings are saving successfully. You may press “Continue” for configure other settings or “Apply” to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more information about this screen.

- 70 -