If you want to erase all values you just entered, please click “Reset” to clear
Reset
your current selections.
After configuration complete, please click “Apply” button to save the configuration. Then you will see a screen to prompt you the settings are saving successfully. You may press “Continue” for configure other settings or “Apply” to restart
Add/Edit QoS Rule
You can assign packet classification criteria by its source IP range, destination IP range, traffic type, protocol, and source port range and destination port range parameters. The parameters that you leave as blank will be ignored. The priority of this rule will be applied to packets that match classification criteria of this rule. You can limit bandwidth consumed by packets that match this rule or guarantee bandwidth required by packets that match this rule.
After press Add or Edit button in QoS screen, you will see the web screen below for user to setup their QoS rule.
Parameters | Description |
Rule Name | Please give a name to the QoS Rule |
|
|
| You can limit the maximum bandwidth consumed by this rule by selecting |
| “Maximum”. You also can reserve enough bandwidth for this rule by |
| selecting “Guarantee”. The unit of bandwidth is Kbps. When we download |
Bandwidth | data from Internet, the unit of download screen shows is KBps. 1KBps is |
| equal to 8Kbps. When you enter the bandwidth, please make sure the |
| number you enter is correct. For example, if you want to limit users |
| download speed to 50KBps from Internet, you will need to enter 400Kbps in |
|
|
| - 47 - |