Planet Technology WNRT-620 5.6.3Virtual Server

	before adding it and want to retype again, just click "Clear" and the fields will
	be cleared.
Reset	Click “Reset” will clear your current settings to allows you to enter again.
Current Port Forwarding Table
	If you want to remove some MAC address from the “Current Access Control
Delete Selected	List”, select the MAC addresses you want to remove in the table and then
	click “Delete Selected”.
Delete All	If you want remove all MAC addresses from the table, just click this button.
Reset	Click “Reset” will clear your current selections.

After configuration complete, please click “Apply” button to save the configuration. Then you will see a screen to prompt you the settings are saving successfully. You may press “Continue” for configure other settings or “Apply” to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more information about this screen.

5.6.3Virtual Server

Use the Virtual Server function when you need to have different servers in your LAN to handle many services and Internet applications (e.g. Email, FTP, Web server etc.) to the Internet. Computers use numbers called port numbers to recognize a particular service/Internet application type. The Virtual Server allows you to re-direct a particular service port number (from the WAN Port) to a particular LAN private IP address as its service port number. (See Glossary for an explanation on Port number).

ParametersDescription

Enable Virtual Server Enable Virtual Server.

- 52 -