Barco E1 manual Driver re-installation, updates or removal, Click “Next”

Driver re-installation, updates or removal

Figure 52

6.Click “Next”.

7.If you installed your driver with DualView enabled, skip to step 8.

If you installed your driver with DualView disabled, click “Next” to continue. Then click “Finish” to complete the uninstall process. Click “Finish” again to exit the wizard.

Click “Yes” if Windows tells you that “you must restart your computer before the new setting will take effect”.

8.If you have installed your driver in DualView mode the wizard will warn you that you must first disable DualView by rebooting and then run the uninstall program again.

Figure 53

Click “OK” to continue.

9.Click “Reboot” to disable DualView, click “Finish” to exit the wizard and then click “Yes” to reboot your system.

110 System manual E1