Barco E1 manual Wall mounting, Remove the panel from the foot, Fix the mounting plate to the wall

Wall mounting

Wall mounting

You can mount the panel to the wall instead of to the foot, by means of the supplied mounting plate. If you do not need to mount the panel to the wall, please skip this item.

Step 1: Remove the panel from the foot

BARCO

Figure 10

c

1.Position one hand under the panel at the front side. Position the other hand at the rear, under the push-button with BARCO logo (1).

2.Firmly press down the push-button (1) with one hand while carefully lifting the panel up with the other hand.

3.Remove the panel from the foot.

Step 2: Fix the mounting plate to the wall

1.Screw the mounting plate to the wall with the 4 supplied screws (figure 11).

32 System manual E1