Barco E1 manual Display controller installation

Display controller installation

Display controller installation

Caution: Wear a grounded, protective ESD strap during installation or handling of the display controller. Electrostatic charges can damage the display controller.

Prior to installing your BarcoMed Nio display controller(s) in your PC please take a few minutes to familiarize yourself with both the display controller(s) and the PCI slots in your computer.

Figure 3: The BarcoMed Nio display controller

Using the VGA capabilities of the BarcoMed Nio display controller

Prior to installing the BarcoMed Nio controller, decide if you are going to use its on-board VGA capabilities. If you are, check the setting of the Jumper at J-1 on the display controller (see figure 4 on page 24). By default, VGA should be enabled, on the top two pins.

System manual E1 23