Barco E1 manual Driver re-installation, updates or removal, Click “Next”

Driver re-installation, updates or removal

doesn’t start within one minute, browse the contents of your E1 Software CD and double click on the file: “Setup.exe” to start the wizard.

2.The BarcoMed Product Installation Wizard will display its welcome screen.

3.Make certain that the checkbox next to the driver is checked and that all other checkboxes are unchecked (figure 51 below). Click “Install” to continue.

Figure 51

4.Click “Next”.

5.On the next screen (see figure 52 on page 110), check the checkbox next to “Uninstall this device” and click “Next” to continue.

System manual E1 109