Windows 2000 BarcoMed Nio software installation
Adapters" in the "Device Manager Control Panel". The second device will be disabled. This is normal. Do NOT try to enable any of the disabled display adapters.
8.The “Device Confirmation” screen displays the device driver that will be installed and if DualView will be enabled or not. If you want to change your selection, click “Back” to return to the Device Selection Screen. Click “Next” to begin installing the driver. Click “Cancel” to abort the driver installation.
Caution: Once you click “Next”, you cannot cancel the driver installation.
Prior to beginning the installation the BarcoMed Driver Install Wizard will warn you that while the driver is being installed your display may flicker. Click “OK” to continue.
9.When the screen shown in figure 23 below and figure 24 on page 45 appears, click “Yes” or “Continue Anyway” to continue. This screen may appear multiple times.
Figure 23: Windows 2000 Digital Signature Not Found Warning
44 | System manual E1 |
