Barco E1 manual Driver installation

Windows 2000 BarcoMed Nio software installation

Hardware Wizard - Video Controller”. Again, please be patient as Windows will again scan its library of Plug-and- Play device drivers to see if it has a driver for your BarcoMed Nio controller.

The BarcoMed Software Install Wizard will automatically restart and the BarcoMed Product Installation Wizard’s welcome screen will again be displayed (figure 17 below).

5.By default all the software on the E1 Software CD will be selected. For the initial installation we recommend that you install all of the software. If you do not want to install a particular BarcoMed Software product at this time, deselect it by clearing the checkbox next to it. Click “Install” to continue or “Cancel” to exit the wizard.

Figure 17

Driver installation

6.Click “Next” on the Display Driver Wizard’s Welcome Screen to continue or “Cancel” to exit the Display Driver Wizard and return to the Software Install Wizard.

The Device Selection Screen’s dialog box (figure 18 on

page 41) should show only those devices physically installed and supported by the BarcoMed display controller driver on

40 System manual E1