Barco E1 manual Windows 2000 BarcoMed Nio software installation

Windows 2000 BarcoMed Nio software installation

your E1 Software CD. Select the device you want to install and then click “Next”.

Note: If there are no BarcoMed devices installed, or if Windows does not recognize the installed devices, or if the driver on your E1 Software CD does not support the installed

devices, the dialog box will be empty1, and the BarcoMed driver wizard will exit when you click “Finish” or “Cancel”.

Figure 18: Sample device selection screen, the device shown in

your system may be different.

Caution: You can install the driver for only one type of BarcoMed device at a time. If you have multiple types of BarcoMed devices installed in your computer, you will need to rerun the installer to install the drivers for the other devices.

If you select a device with an installed driver, the wizard will warn you if the installed driver is newer than the one you are installing (see figure 19 on page 42).

1.If Windows does not recognize the installed BarcoMed device, special settings may need to be made in the BIOS to support non-AGP video controllers or to support multiple video controllers. Check with your PC manufacturer.

System manual E1 41