BarcoMed Driver Tab
BarcoMed Driver Tab
Introduction
After the BarcoMed Windows display controller driver is installed, a new Display Properties tab is available for configuring special features of the BarcoMed display controller.
Languages supported
The BarcoMed Driver Tab supports the following languages:
English (U.S) (default)
Dutch
German
Korean
Japanese
Simplified Chinese
Traditional Chinese
To change between the languages select the correct region via the Regional Settings Control Panel in your machine’s Start > Settings > Control Panel.
Using the BarcoMed Driver Tab
Please note that you must have logged on to Windows using an account with administrator privileges in order to use the BarcoMed Tabs of the Windows Display Control Panel to change any display settings.
1.Open the “Display Properties Control Panel” by right clicking on the desktop, then select “Properties”.
2.Under Windows 2000 or Windows XP, click on “Settings” tab. Double click on the rectangle that represents the Barco display whose settings you wish to change to bring up its property page. Click on the “BarcoMed Driver” tab (see figure 29 on page 54).
System manual E1 | 53 |
