NioWatch operation

display controller head. In that way you can easily see which display is connected to which head.

The Display tab allows to view information about the display.

The Graphic Board tab allows to view information about the display controller.

The Calibration tab allows to calibrate the display(s) or view the result of the last calibration.

Display tab

In the Display Info section, you can view the name and serial number of the selected display.

For Nio (E-XX20) displays, you can also view:

Lifetime:

Operation time including time in stand-by

Runtime:

Operation time excluding time in stand-by

Firmware version:

Version of internal display software

Backlight Stabilization:Status of the backlight stabilization in the display.

To select another display function, select an item from the Display Function drop-down box.

If the selected display has been calibrated to the selected display function in the past, the display will be set according to this calibration. If no former calibration was found, default factory settings are selected.

When you restart NioWatch, the last selected display function is automatically selected.

74

System manual E1

Page 73
Image 73
Barco E1 manual Display tab