Barco E1 NioWatch operation Calibration tab, To calibrate the display using the Barco LCD sensor

NioWatch operation

Calibration tab

Figure 38: Calibration tab

Here you can calibrate display(s), revert to the latest calibration, revert to default factory settings and view the result of the latest calibration. The possible options are explained below.

To calibrate the display using the Barco LCD sensor:

1.If you have multiple displays of the same type connected (multi-head system), consider if you wish to equalize the display you calibrate to a reference display.

Equalization means the luminance of the display you are calibrating will be matched to the luminance of the reference display.

If you wish to equalize the display, you must close the Display Settings dialog and make sure the Equalization

System manual E1 77