Barco E1 manual NioWatch operation, The luminance setting is saved when the system is shut down

NioWatch operation

•To adjust display luminance manually, adjust the Luminance slider. This function is not available for MFCD/MFGD 1218 displays.

The luminance setting is saved when the system is shut down.

If the slider is positioned above the CAL mark, the luminance is in calibrated position, as determined during the latest calibration. If the slider is not above the CAL mark, the luminance is not in calibrated position.

Important

If you want the system to be DICOM compliant, you must select the DICOM display function and calibrate the display. After calibration, the luminance must remain in calibrated position to maintain DICOM compliance.

System manual E1 75