Introduction of advanced
built-in CD player operation
1
2
1RPT indicator
Shows when repeat play is turned on.
2Function display
Shows the function status.
%Press FUNCTION to display the function
names.
PressFUNCTION repeatedly to switch be-
tween the following functions:
RPT (repeat play)RDM (random play)
SCAN (scan play)PAUSE(pause)COMP
(compression and BMX)FF/REV (search
method)TAG (tag display)
#Toreturn to the playback display, press BAND.
Notes
!Whenplaying audio data (CD-DA), it is not ef-
fectiveeven if you turn TAG (tag display) on.
(Referto page 24.)
!If you do not operate the functionwithin about
30seconds, thedisplay is automaticallyre-
turnedto theplayback display.
Repeating play
Repeat play lets you hear the same track over
again.
1 PressFUNCTION to select RPT.
PressFUNCTION until RPT appears in the dis-
play.
2 Pressato turn repeat play on.
RPT:ON appears in the display. The track cur-
rently playing will play and then repeat.
3 Pressbto turn repeat play off.
RPT:OFF appears in the display. The track cur-
rently playing will continue to play and then
play the next track.
Note
If you perform track search or fast forward/re-
verse,repeat play isautomatically cancelled.
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
1 PressFUNCTION to select RDM.
PressFUNCTION until RDM appears in the
display.
2 Pressato turn random play on.
RDM:ON appearsin the display. Tracks will
play in a random order.
3 Pressbto turn random play off.
RDM:OFF appearsin the display. Tracks will
continue to play in order.
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
Built-in CD Player
En
16
Section
05