Setting the sound focusequalizer (SFEQ)
Clarifying the sound image of vocals and in-
struments allows the simple staging of a nat-
ural, pleasant sound environment. Even
greater listening enjoyment will be obtained if
seating positions are chosen carefully. FRT1
boosts the treble on the front output and the
bass on the rear output. FRT2 boosts the treble
and the bass on the front output and the bass
on the rear output. (The bass boost is the
same for both front and rear.)For both FRT1
and FRT2,Hsetting provides a more pro-
nounced effect than Lsetting.
1 PressEQ-EX and hold to switch to SFEQ
function.
PressEQ-EX and hold until SFEQ indicator ap-
pears in the display.
#Toswitch to EQ-EX function, press EQ-EX and
hold.
2 PressEQ-EX to select the desired SFEQ
setting.
PressEQ-EX repeatedly to switch between the
following settings:
FRT1-H (front 1-high)FRT1-L (front 1-low)
FRT2-H (front 2-high)FRT2-L (front 2-low)
CUSTOM (custom)SFEQ OFF (off)
3 Presscor dto select the desired posi-
tion.
Presscor duntil the desired position ap-
pears in the display.
L(left)C(center)R(right)
Notes
!If you adjust the bass or treble, CUSTOM
memorizesan SFEQ settingin which the bass
andtreble are adjusted for personal prefer-
ence.
!If you switch the SFEQ setting, the HPF func-
tionis automaticallyturned off. By turning the
HPFfunction on after selecting the SFEQ set-
ting,you cancombine HPF functionwith
SFEQfunction.
Using balance adjustment
Youcan select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 PressAUDIO to select FAD.
PressAUDIO until FA D appearsin the display.
#If the balance setting has been previously ad-
justed,BAL will be displayed.
2 Pressaor bto adjust front/rear speak-
er balance.
Each press of aor bmoves the front/rear
speaker balance towards the front or the rear.
FAD:F15 FAD:R15 is displayed as the front/
rear speaker balance moves from front to rear.
#FAD: 0 is the proper setting when only two
speakersare used.
#Whenthe rear outputsetting isR-SP :S/W,
youcannot adjust front/rearspeaker balance.
Referto Setting the rear output and subwoofer
controller onpage 41.
3 Presscor dto adjust left/right speaker
balance.
When you press cor d,BAL: 0is displayed.
Each press of cor dmoves the left/right
speaker balance towards the left or the right.
BAL: L9BAL : R9 is displayed as the left/
right speaker balance moves from left to
right.
Audio Adjustments
En
34
Section
08