Introduction of audioadjustments
4
3
1
5
6
2
1SFEQ indicator
Appears in the display when SFEQ function
can be activated.
2Loudness indicator
Appears in the display when loudness is
turned on.
3SW indicator
Shows when the subwoofer output is turned
on.
4Audio display
Shows the audio adjustments status.
5EQ-EX indicator
Appears in the display when EQ-EX function
can be activated.
6CUSTOM indicator
Shows when custom equalizer curve is cur-
rently selected.
%Press AUDIO to display the audio func-
tion names.
PressAUDIO repeatedly to switch between
the following audio functions:
FAD (balance adjustment)EQ (equalizer
curve adjustment)B(bass and treble level
adjustment)LOUD (loudness)SUB, W
(subwoofer on/off setting)/NOFAD (nonfading
output on/off setting)80: 0 (subwoofer set-
ting)/NOFAD(non fading output setting)
HPF (high pass filter)SLA (source level ad-
justment)
#If EQ-EX function has been selected and only
whenEQ-EX is turned on and CUSTOM is se-
lectedas the equalizer cur ve, you can switch to
B.
#Whenthe subwoofer controller settingis only
P/O:FUL, you cannot switch to SUB, W. (Refer to
page41.)
#Youcan select the 80: 0 only when subwoofer
outputis turned on in the SUB, W.
#Whenthe subwoofer controller settingis only
P/O:FUL, you can switch to the non fading out-
puton/off setting.(Refer to page 41.)
#Youcan select the non fading output setting
onlywhen non fading output is turned on in the
nonfading output on/offsetting.
#Whenselecting the FM tuner as the source,
youcannot switch to SLA.
#Toreturn to the display of each source, press
BAND.
Note
If you do not operate the audio function within
about30 seconds,the display isautomatically re-
turnedto thesource display.
Compensating forequalizer curves (EQ-EX)
The EQ-EX function smoothes the effects of
each equalizer curve. Furthermore, you can
adjust bass and treble for each source when
CUSTOM curve is selected.
!If SFEQ has been previously selected, press
EQ-EX and hold to switch to EQ-EX and
EQ-EX appears in the display.
%Press EQ-EX to turn EQ-EX on.
EQ-EX:ON appears in the display.EQ-EX is
now on.
#Toturn EQ-EX off, press EQ-EX.
Audio Adjustments
En 33
English
Section
08