2 PressAUDIO to select the band for ad-
justment from among low,mid and high.
PressAUDIO repeatedly to switch between
the following functions:
LowMidHighB(bass adjustment)T
(treble adjustment)
#If EQ-EX function has been selected and only
whenEQ-EX is turned on and CUSTOM is se-
lectedas the equalizer cur ve, you can switch to B
andT.
3 Presscor dto select the desired fre-
quency.
Presscor duntil the desired frequency ap-
pears in the display.
Low:4080100160 (Hz)
Mid: 2005001k2k (Hz)
High: 3k8k10k12k (Hz)
4 Pressaor bto select the desired Q fac-
tor.
Pressaor buntil the desired Q factor ap-
pears in the display.
2N1N1W2W
Note
If you make adjustments, CUSTOM curve is up-
dated.
Adjusting bass and treble
Youcan adjust bass and treble settings.
!If EQ-EX function has been selected and
only when EQ-EX is turned on and
CUSTOM is selected as the equalizer
curve, you can adjust bass and treble set-
tings.
!If SFEQ has been set to FRT1, bass adjust-
ment affects only the rear output: front out-
put cannot be adjusted.
!If SFEQ has been set to FRT1 or FRT2,tre-
ble adjustment affects only the front out-
put: rear output cannot be adjusted.

Adjusting bass and treble level

Youcan adjust the bass and treble level.
1 PressAUDIO to select B.
PressAUDIO until Bappears in the display.
#If the treble level has been previously ad-
justed,Twill be displayed.
2 Presscor dto select bass or treble.
Presscand Bis displayed. Press dand Tis
displayed.
3 Pressaor bto adjust the level.
Each press of aor bincreases or decreases
the selected bass or treble level. +6 6is dis-
played as the level is increased or decreased.

Selecting bass frequency

Youcan select the bass frequency for level ad-
justment.
1 PressAUDIO and hold until frequency
and the Q factor (e.g., F- 80:Q1W) appears
in the display.
2 PressAUDIO to select B.
PressAUDIO until Bappears in the display.
3 Presscor dto select the desired fre-
quency.
Presscor duntil the desired frequency ap-
pears in the display.
4063100160 (Hz)
Audio Adjustments
En
36
Section
08