Playtex DEH-P560MP Adjusting initial settings, Setting the clock, Switching the warning tone, Switching the auxiliary setting, Initial Settings

Adjusting initial settings
1
Initial settings lets you perform initial set up of
different settings for this unit.
1Function display
Shows the function status.
1 PressSOURCE and hold until the unit
turns off.
2 PressFUNCTION and hold until the
clock appears in the display.
3 PressFUNCTION to select one of the in-
itial settings.
PressFUNCTION repeatedly to switch be-
tween the following settings:
ClockWARN(warning tone)AUX (auxili-
ary input)DIMMR (dimmer)R-SP (rear out-
put and subwoofer controller)TEL
(telephone)
Use the following instructions to operate each
particular setting.
#Tocancel initial settings, press BAND.
#Youcan also cancel initial settings by holding
downFUNCTION until the unit turns off.
Setting the clock
Use these instructions to set the clock.
1 PressFUNCTION to select clock.
PressFUNCTION repeatedly until clock ap-
pears in the display.
2 Presscor dto select the segment of
the clock display you wish to set.
Pressingcor dwill select one segment of the
clock display:
HourMinute
As you select segments of the clock display
the segment selected will blink.
3 Pressaor bto set the clock.
Pressingawill increase the selected hour or
minute. Pressingbwill decrease the selected
hour or minute.
Switching the warning tone
If the front panel is not detached from the
head unit within five seconds of turning off the
ignition, a warning tone will sound. Youcan
turn off the warning tone.
1 PressFUNCTION to select WARN.
PressFUNCTION repeatedly until WARN ap-
pears in the display.
2 Pressaor bto turn WARN on or off.
Pressingaor bwill turn WARN on or off and
that status will be displayed (e.g.,
WARN:ON).
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
Initial Settings
En
40
Section
09