User’s Guide for Polycom HDX Systems and the Polycom Touch Control
2Polycom, Inc.
Using the Polycom Touch Control
You use the touch control to place calls, adjust the volume, control the camera,
show content, and select options.
Powering the System On and Off
To power on the Polycom HDX system:
>> Press the power switch on the front of the HDX system. The Polycom
splash screen is displayed on the monitor within about 10 seconds.
To power on the Polycom Touch Control:
>> Reconnect the LAN cable to the underside of the device. The Home button
is lit when the device is powered on.
Scroll left and right on the
Home screen for quick access
to common calling and
configuration tasks.
Press Back to go to the
previous screen. Press Home
to go to the Home screen.
Use the call screen for
quick access to common
tasks while you are in a
call.
Touch the screen to select an item.
Drag your finger across the screen to
scroll.
Use the Polycom Touch Control to control
a Polycom HDX system.
Caution. In order to avoid corrupting the file system, always power off a Polycom
HDX system using the power button on the system. After turning the power off in
this way, wait at least 15 seconds before you unplug the system from its power
source. This helps ensure that the system powers off correctly.
The Power button affects any HDX system within the range of the remote
control, regardless of the Channel ID setting.