Polycom IP 320 Connecting Network and Power Source, Connecting the Handset and Optional Headset

User Guide SoundPoint IP 330/320

Connecting Network and Power Source

Use Power over Ethernet (PoE) for network and power source connections unless otherwise directed by your system administrator.

Note	The AC power adapter is a separate, optional accessory. Your system administrator
	will provide one to you if necessary.

Power over Ethernet

Using a regular CAT5 cable (optional accessory from Polycom), the phone can be powered from a PoE (IEEE 802.3af) compliant switch or hub.

To connect the PoE:

•Plug the supplied network cable between the LAN jack on the phone and an available power and data port on the in-line power switch.

IEEE802.3af compliant PoE

Hub/Switch/Midspan Unit

	Power Adapter
	(Optional Accessory)
Note	The SoundPoint IP 330 has an optional PC connection. The SoundPoint IP 320
	does not. This is the only difference between the phones.

If you want to use the optional PC connection on the SoundPoint IP 330, a separate ferrite clamp (not included) is required. Contact your system administrator.

Connecting the Handset and Optional Headset

To connect the handset and optional headset:

1.Connect the short straight end of the phone cord to the handset and the corresponding longer straight end of the cord to the handset jack on the back of the phone.

1 - 4