Using the Basic Features of Your SoundPoint IP 550 Phone
Note | Incoming calls may be ignored by pressing the Reject soft key (for private lines) or |
| the Silence soft key (for shared lines) or Do Not Disturb during ringing. The Do |
| Not Disturb mode stays active when the call is dropped and will remain so until |
| toggled off. |
| Incoming calls may be forwarded by pressing the Forward soft key. For more |
| information, refer to Dynamic Forwarding on page |
|
|
| Answering When Not in Another Call |
| In all cases, the active call will appear on the graphic display showing call |
| duration and destination. |
To answer a call using the handset:
>>Pick up the handset.
To answer a call using
>>Do one of the following steps:
—Press 
.
— With the handset 
opposite the incoming call (where the line status indicator is flashing green).
—Press the Answer soft key.
To answer a call using the headset:
>>Press 
to answer the call through an optionally connected headset.
If Headset Memory Mode is activated, press | or the |
Answer soft key. |
|
Answering When in Another Call
You are busy on an active call and a second incoming call arrives on the same phone number.
•If your phone is configured for a single Line Key per line:
—The second call will cause a call waiting tone to be played, the second line status indicator is fast flashing green, and an incoming call icon appears. Caller information for the incoming call appears on the graphic display.
3 - 5
