![](/images/new-backgrounds/1257540/257540115x1.webp)
User Guide SoundPoint IP 550
4.Do one of the following steps:
—Enter the next available speed dial index.
— Delete the existing speed dial index by using | followed by | , |
and then enter a new speed dial index. |
|
|
— Press and hold an unassigned | . |
|
The next available speed dial index will be assigned automatically.
5.Press the Save or Cancel soft keys to accept or cancel changes.
6.Press or the Exit soft key repeatedly to return to the idle display.
To assign a new speed dial key: |
|
1. Press and hold an unassigned | . |
A new empty entry in the contact directory is automatically opened allowing contact information to be added.
2.Press the More soft key.
3.Press the Add soft key.
4.Enter first and/or last name of the contact from the keypad.
Use the 1/A/a soft key to select between numeric and upper/lower case alphanumeric modes.
Use the Encoding soft key to access special characters in other languages.
5.Enter a contact number.
This is a required field and it must be unique (not already in the directory).
6.Change the Speed Dial Index.
The index can be any value between the next available index value and the maximum (9999).
Polycom recommends that you assign speed dial index values consecutively.
For example, if the third Line Key is assigned to the speed dial index value “2”, assign the fourth Line Key the speed dial index value “3”.
7.Press the Save or Cancel soft keys to accept or cancel changes.
8.Press or the Exit soft key repeatedly to return to the idle display.
3 - 18