SpectraLink 6300 MCU: Facility Preparation
5.Screw the protective cover onto the Base Station enclosure.
Power Up and Check Diagnostics
Turn the power switch in the upper left of the Primary and Expansion Shelves on.
After a slight delay, the lights on the cards will cycle through diagnostic tests.
After testing completes, lamp 1 should flash green, indicating that the card is running. If the Alarm light is red, there is a problem with the system. Refer to SpectraLink 6300 MCU: Maintenance and Diagnostics for troubleshooting information.
52 | PN: |
