9
Site Certification
The Polycom field service engineer should not leave the site before contacting Polycom to perform remote install verification.
The field service engineer should contact a Polycom engineer on the technical support line at
Before leaving the installation site, the field service engineer must complete the following items:
From the Operator’s Console, copy the PCS.CFG file to diskette. From the Operator’s Console, press F1 (Supervisor State Display) then select Dump Config to PCS.CFG. See SpectraLink 6300 MCU:
Operator’s Console Chapter 5, section Dump Config to Disk for more information.
Give the system administrator a map of the system showing the final Base Station locations.
Perform
Perform administrative training and get a signature on the acceptance document. This document confirms that the installation has been correctly carried out, that the coverage area is correct, and that the client’s personnel have been trained.
The installation is not complete until all certification steps have been performed. SpectraLink 6000 Wireless Telephones should not be handed out until the site has been certified.
PN: | 57 |
