1.Read and understand the entire owner's manual before attempting assembly or operation.

2.Read and understand the warnings posted on the machine and in this manual. Failure to comply with all of these warnings may cause serious injury.

3.Replace the warning labels if they become obscured or removed.

4.This drum sander is designed and intended for use by properly trained and experienced personnel only. If you are not familiar with the proper and safe operation of a drum sander, do not use until proper training and knowledge have been obtained.

5.As with all machines, there is a certain amount of hazard involved with the use of this drum sander. Use the machine with the respect and caution demanded where safety precautions are concerned. When normal safety precautions are overlooked or ignored, personal injury to the operator can result.

6.Do not use this drum sander for other than its intended use. If used for other purposes, Powermatic disclaims any real or implied warranty and holds itself harmless from any injury that may result from that use.

7.ALWAYS WEAR APPROVED SAFETY GLASSES/face shields while using this drum sander. Everyday eyeglasses only have impact resistant lenses; they are not safety glasses.

8.WEAR PROPER APPAREL. Before operating this drum sander, remove tie, rings, watches and other jewelry, and roll sleeves up past the elbows. Remove all loose clothing and confine long hair. Non-slip footwear or anti-skid floor strips are recommended. Do not wear gloves.

9.Wear ear protectors (plugs or muffs) during extended periods of operation.

10.Some dust created by power sanding, sawing, grinding, drilling and other construction activities contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•Lead from lead based paint.

•Crystalline silica from bricks, cement and other masonry products.

•Arsenic and chromium from chemically treated lumber.

Your risk of exposure varies, depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well-ventilated area and work with approved safety equipment, such as face or dust masks that are specifically designed to filter out microscopic particles.

11.Do not operate this machine while tired or under the influence of drugs, alcohol or any medication.

12.Make certain the machine is properly grounded.

13.Except for the feed rate control, make all machine adjustments or maintenance with the machine unplugged from the power source. A machine under repair should be RED TAGGED to show it must not be used until maintenance is complete.

14.Before turning on machine, REMOVE ALL EXTRA EQUIPMENT SUCH AS KEYS, WRENCHES, scrap, and cleaning rags away from the machine.

15.KEEP SAFETY GUARDS IN PLACE at all times when the machine is in use. If removed for maintenance purposes, use extreme caution and replace the guards immediately.

16.CHECK DAMAGED PARTS. Before further use of the machine, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

17.Provide for adequate space surrounding work area and non-glare, overhead lighting.

4

Page 3 Page 5
Page 4
Image 4
Powermatic DDS-237, DDS-225 operating instructions
Page 3 Page 5

DDS-225, DDS-237 specifications

The Powermatic DDS-237 and DDS-225 are two advanced drill presses that have been engineered for woodworkers who demand precision and versatility in their projects. These machines are part of Powermatic’s commitment to providing high-quality tools that cater to both professional and hobbyist woodworkers.

One of the main features of the DDS-237 is its robust construction. With a heavy-duty cast iron base and column, this drill press offers exceptional stability, reducing vibrations during operation which leads to accurate drilling. The DDS-225 follows suit, providing a durable design that ensures reliability even in the most challenging work environments.

The DDS-237 comes equipped with a powerful 1 HP motor, offering variable speed control ranging from 250 to 3000 RPM, allowing users to select the perfect speed for various materials. This feature is particularly advantageous for woodworkers who work with different species of wood or even metal and plastic. The DDS-225, on the other hand, features a slightly less powerful motor but maintains the same level of versatility with multiple speed settings.

Another significant aspect of these drill presses is their user-friendly interface and adjustments. Both models boast an easy-to-read digital depth gauge, enabling precise depth adjustments. This feature is crucial for applications requiring repetitive drilling depths, such as doweling or creating mortises.

Both models also incorporate innovative technologies aimed at enhancing user safety and convenience. The patented Quick-Release chuck system allows for rapid and easy tool changes without the need for additional tools, saving valuable time during setup and operation. Furthermore, the built-in work light illuminates the workspace, improving visibility during intricate drilling tasks.

Dust collection is also a fundamental aspect of both models, with integrated ports designed to minimize debris in the workspace, creating a healthier and cleaner working environment.

The Powermatic DDS-237 and DDS-225 are not just machines but essential tools that combine power, precision, and safety. Whether for professional use or serious woodworking enthusiasts, these drill presses are designed to meet the demands of any project with reliability and efficiency.
Top Page Image Contents