Operational Controls and Features | 6 |
6.1 General
The UPS system should function automatically and require very little attention during normal operation. The controls and indicators identified in this section are used during startup to monitor normal operation and during abnormal events.
Figure 6–1 identifies and shows the location of the controls and indicators on the Powerware 9335 (80 kVA and 120 kVA) UPS. The descriptions provide a brief overview of the UPS controls, and standard and optional features.
NOTE: Read the Operation section of this manual and have thorough knowledge of UPS
operation before attempting to operate any of the UPS controls or optional components.
Customer
Communication
Interfaces
Maintenance
Bypass
Switch (IA1)
Customer
Power
Connections
|
| Control Panel | Rear side of User | |
|
|
| ||
|
|
| control panel | |
|
|
| (mounted on UPS | |
| JD8 |
| cabinet door) | |
|
|
| ||
|
| System |
| |
| configuration | |||
|
| |||
| DIP switches | |||
| X4 | |||
| (SW1 & SW2) | |||
| X3 | |||
| X2 | |||
| X1 |
|
| |
| JD2 |
|
| |
| JD1 |
|
| |
|
| Parallel Isolator | ||
|
| Switch (IA2) |
| |
IA1 | IA2 | (used only for | ||
inverter output | ||||
|
| |||
|
| isolation) |
|
Figure 6–1. Powerware 9335 (80 kVA and 120 kVA) Controls and Indicators
Powerware 9335 (80 kVA and120 kVA) Installation and Operation | |
164201396 REV. A 071103 |
|