Powerware Single-Port Serial Card, X-Slot Location on Front of Powerware 9335 UPS Cabinet

	Control Panel
X–Slot location
for insertion of
X–Slot Cards	JD8
	SW2-9
	SW1-1
	X4
	X3
	X2
	X1
	JD2
	JD1
IA1	IA2

Figure 10–1. X–Slot Location on Front of Powerware 9335 UPS Cabinet

10.2 Single-Port Serial Card

To establish communications between the UPS and a computer, connect your computer to the UPS communication port using the supplied communication cable.

When the communication cable is installed, power management software installed on your computer can exchange data with the UPS. Powerware supplies monitoring software with each UPS. See instructions packaged with the software for installation and operation. The software polls the UPS for detailed information on the status of the

10-2	Powerware 9335 (80 kVA and 120 kVA) Installation and Operation
	164201396 REV A 071103