Setting Up the Console | 17 |
Number Part Name | Details |
Enter key |
|
Workout key | Displays preset workouts |
Input Up key | Use to navigate user menus |
Input Down | Use to navigate user menus |
key |
|
GO key | Use to begin your workout |
Reset key | (Pause/Reset on tread consoles) |
Intensity | Displays level of resistance. This window |
indicator | can appear on single and dual indicator |
| equipment. |
Incline | Displays level of incline |
indicator | Treadmill, EFX |
| |
Incline Up | Increases incline level |
| Treadmill, EFX |
Incline Down | Decreases incline level |
| Treadmill, EFX |
Intensity Up | Increases resistance or speed. This key |
key | appears on single indicator equipment. |
Intensity | Decreases resistance or speed. This key |
Down key | appears on single indicator equipment. |
Welcome State
The equipment is in the Welcome state when it is on, but not actually in use. This means that there is no exercise session, data entry, or diagnostic operation in progress.
When the equipment is in the Welcome state:
WELCOME scrolls on the program display. This is referred to as the Welcome banner.
PRESS GO OR PROGRAMS TO START scrolls in the text display.
The heart rate signal is the only segment activated.
On the treadmill, the belt is not moving and the lift motor is off.
