Assembling the EFX | 21 |
Installing the Handlebars
CAUTION: Handlebars can swing and cause injury. Have your assistant hold the handlebar and gently lower it into a vertical position when the handlebar assembly is complete.
To install the moving handlebars:
1.For proper alignment, rotate the pivot arm to a horizontal position. Apply pressure to fit the protrusion on the handlebar into the handlebar bracket.
Figure 8: Handlebar and bracket attachment
2.Insert three socket head cap screws, three split washers, and three washers through each handlebar bracket. To secure the handlebars, wrench tighten the fasteners using a
Figure 9: Upper body handlebar attachment detail
