C O M M E R C I A L P R O D U C T S D I V I S I O N

Diagram 7

Attach the

 

display console

 

to the left upright

 

support.

 

Display console

 

Display cable

 

Screws (A) with

 

washers (B)

 

Left side

 

upright support

CAUTION:To avoid damage to the display cable, read the following steps carefully. Damage to the cable due to improper assembly is not covered by the Precor limited warranty.

6.Secure the display console to the left upright support. Diagram 7. Remove any tape or wire ties that secure the display cable. Unwrap the cable to remove kinks. Ask an assistant to hold the display console in place while you attach it to the left upright support using two buttonhead screws (A) with washer (B). Finger tighten.

Diagram 8

Remove right

 

side front panel

 

screws.

 

Right side

 

mounting bracket

 

Front panel

 

fasteners

7.Prepare to attach the right side upright. Diagram 8.Take the following steps:

a.Remove the shipping fasteners from the right front panel. Follow the same process as in step 5a. With the supplied hex key and a ½-inch box end wrench, loosen and remove the two bolts, washers and nuts on the right side of the front panel.

page 13

Page 13
Image 13
Precor c954 owner manual Attach