Precor c954 owner manual Hardware KIT

C O M M E R C I A L P R O D U C T S D I V I S I O N

HARDWARE KIT

After unpacking the treadmill, open the hardware kit and make sure that you have the following items shown in Diagram 2.

❑(A) twelve 1-inch buttonhead hex screws

❑(B) twelve flat stainless steel washers — place on 1-inch buttonhead hex screws

❑(C) four 1/2-inch flat head hex screws — attach to upper handrails

❑(D) four 3 1/4-inch socket head screws — install upright supports

❑(E) four flat black washers — place on 3 1/4-inch socket head screws

❑(F) four barrel spacers — place on 3 1/4-inch socket head screws after washers

❑(G) 5/32-inch hex key — attach handrails to display frame

❑(H) 3/16-inch hex key — attach hood, mount upr ight supports, attach display and handrails to base frame

❑(J) 1/4-inch hex key — attach upright supports to base mounting brackets

❑(K) 5/16-inch hex key — adjust running belt

Diagram 2 Hardware kit (not shown to scale).

D

AC

F

B

E

G

H

J

K

Note: After assembling the treadmill, be sure to store the hex keys in a secure place. The tools are used for specific maintenance procedures that are described in this manual.

page 9