Precor c954 owner manual Secure

C O M M E R C I A L		P R O D U C T S	D I V I S I O N
Diagram 11	Secure the right
	upright support.		1
	Screws (D),
	washers (E),
	and barrel
	spacers (F)
	Tighten so that
	the upright is
	secure, but
	leave room for
	adjustments.
	Right upright
	support
	Front panel	3	2

8.Secure the upright support. Diagram 11, #1. Obtain two screws (D), washers

(E) and barrel spacers (F) from the Hardware kit. Place a washer and barrel sleeve on each bolt and insert the fasteners through the side of the upright support and into the base mounts.Secure the upright support using the 1/4-inch hex key. See Diagram 11, #3.

Important: Do not securely tighten the screws until after the unit has been fully assembled. Make sure that the bolt and spacer do not pinch the cable.

9. Insert the two bolts removed in step 5a, and finger tighten. Diagram 11, #2.

Diagram 12	Secure the
	display console.
	Display console
	1-inch screws (A)
	with washers (B)
	Tighten the
	screws, but
	leave room for
	adjustments.

10.Secure the display console to the upright supports. Diagram 12. Align the display console with the right side upright support mounts. Insert two 1-inch screws (A) with washers (B) and finger tighten. Fully tighten the screws using the hex key provided. Do the same for the opposite upright support. See inset in Diagram 12.

page 15