C O M M E R C I A L P R O D U C T S D I V I S I O N
Diagram 16 | Raise or |
|
| lower the |
|
| deck. |
|
| Hand holds |
|
| on rear end |
|
| caps |
|
| Adjustable |
|
| rear foot |
|
| 1 | 2 |
15.Adjust the rear deck. Diagram 16. To raise the rear deck, situate yourself next to the adjustable rear foot. Ask an assistant to lift the rear of the tread- mill slightly while you turn the adjustable rear foot clockwise.Turning the rear foot counterclockwise lowers the unit.
CAUTION: The treadmill requires a dedicated, grounded circuit. A 20 amp dedicated circuit is recommended. Make sure that no other product or machine uses the same circuit as the treadmill.
16.Connect the power cord. Unwrap the power cord from the packing material and plug it into its receptacle on the front panel. Make sure that the ON/OFF (I/O) power switch is placed in the OFF (O) position and connect the power plug to a dedicated, grounded circuit.
TURNING THE UNIT ON AND OFF
Use the ON/OFF (I/O) power switch, located on the front panel, to turn the unit ON and OFF.
To complete the installation of the treadmill, continue with Checking the Alignment of the Running Belt.
page 18
